10 out of 10 is our favorite series of video tutorials and in this one we are looking at the FIRST LEGO League 2021 RePlay competition and the tire flip mission. The goal of the mission is to flip a tire. Two tire. Perfect. We manage to do it each and every try
In this LEGO robotics video tutorial we will accomplish mission 8 from the FIRST LEGO League 2020 RePlay competition. The name of the mission is Boccia. What you will learn from the video is how to accomplish complex missions that require following a line, aligning to the line and accomplishing many mission models in a single run
In this video tutorial we demonstrate the behavior of a LEGO Mindstorms Robot Inventor robot when we use the Motion sensor. The Motion sensor was also referred to as Gyro sensor in previous versions of the LEGO Mindstorms Robot. We do not enter into the details of the programming and you can download the programs from the course lesson, but we make a demonstration of how the robot turns to about 95 degrees when we try to turn it to 90 degrees, we explain why and we suggest a way to improve the behavior of the robot.
This video tutorial is about accomplishing the Pull-Up bar mission from the FIRST LEGO League 2020 RePlay robotics competition. The goal of the mission is to move with the robot and pull the robot up. With this video tutorial you will learn how to build such attachments and how missions that are about lifting the whole robot could be accomplished. The attachment also makes a very good use of rubber bands.
It all started with the famous 2017 mission for flipping a manhole and it was one of our favorite missions ever. Here in this tutorial we demonstrate the same principle of flipping a part from one side to the other. Sounds interesting, yes it is, yes it is.
In this video tutorial we continue the exploration of pinless attachments and how to add them and remove them in a quick fashion. We've done this for SPIKE Prime and for EV3 and we will provide some other references in the lesson in the course. The idea of an attachment below the robot is that sometime, during FIRST LEGO League competitions we have to bring a mission model from one place of the field to other. Basically push it.
In this video tutorial we accomplish the Basketball mission 10 out of 10 times. We use one of the more complex attachments for the FIRST LEGO League 2020 RePlay competition. You will see an learn how to successfully and consistently complete a mission that requires the robot to put a ball into a basket and lift the basket, or lift the basket and put the ball into it.
This animation demonstrates the principle of aligning to a line with two color sensors and a LEGO Mindstorms Robot Inventor robot. This is a useful concept for FIRST LEGO League competitions where you want to know exactly where you are on the field and to achieve consistent behavior. In the course lesson you will also find a live video tutorial where we enter into more details about aligning. We align the robot to a line by moving both sensors slowly until they both see a black line. When one of them sees the line we move only the other. At the end we return the first sensor back.
Following the Advance Sensor Calibration course section, we found the min and max values detected by each sensor. Now it is time for the real deal of the calibration. Detect the current value from the sensor and find what is the percentage of this value for the range between min and max.
This LEGO robotics video tutorial is a 10 out of 10 run of the one of the most complex missions at the FIRST LEGO League 2021 RePlay competition. As the mission has three parts we are measuring the success rate of each part of the mission. What you can learn from this tutorial is how to achieve three missions in a single run including line following and a lot of aligning
In this video tutorial we demonstrate how the robot could accomplish the Power Switch mission. Power Switch consists of a cube with a lever and the lever should be rotate to 180 degrees. This mission model was very close to a FIRST LEGO League 2012 competition mission which was called - Oven. The robot, the attachment adn the mission model are built form a single LEGO Mindstorms Robot Inventor 51515 set and with the tutorial you will learn how to use an active attachment with 2 gear wheels to complete such missions.
This robotics video tutorial is about the FIRST LEGO League 2020 RePlay competition and how we accomplish the Slide mission with a LEGO Education SPIKE Prime robot. The goal of the Slide mission is to collect two LEGO Mini figures and bring them back to base. We are demonstrating a simple attachment that collects 2 figures placed in an add way. The whole attachment must bring one of the figures up and then back.
In this video tutorial we demonstrate a Grab attachment build from LEGO Mindstorms Robot Inventor 51515 set. The goal of the grab attachment is to accomplish the mission of bringing loops back to base without loosing or dropping them when returning. The principle of the grab attachment also demonstrates how to have a a locking mechanism. In this way there is not way to the loop to escape.
This short animation demonstrates a really useful principle for FIRST LEGO League competition and this is how to use the Inertia of the robot to trigger an attachment that will do the work for us. It is very useful as we don't have to use the motors of the robot and we can afford to use the motors for other things.
The Cell Phone mission is part of the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to flip the Cell Phone. In this video tutorial we use a LEGO Education SPIKE Prime robot to flip the cell phone. This mission is similar to the FLL 2017: How to accomplish Manhole Cover (08th) Mission in FIRST LEGO League 2017-2018.
With this animation we demonstrate an example for a quick pinless attachment that could be used to collect loops. Loops is one of the most common missions at FIRST LEGO League competitions. We use the LEGO Mindstorms Robot Inventor set to build the attachment, the mission model and the robot. They are all from the same attachment. In the live video in the same lesson we enter into more details about the attachment and we describe its idea
In this LEGO robotics video tutorial we accomplish Weight Machine mission from the FIRST LEGO League 2021 RePlay robotics competition. The goal of the competition is to lift a weight. The mission model resembles a weight machine, and is actually a lever. There are three different levels and you earn different points depending on the level. The attachment for this mission model uses rubber bands and lifts the mission model.
10 out of 10 video tutorial for Rowing Machine mission from the FIRST LEGO League 2021 RePlay robotics competition. In the tutorial you will see how to accomplish the mission almost every time. This is a mission that requires a lot of precision so naturally it is difficult to accomplish it every time, but with the right attachment for the LEGO Education SPIKE Prime robot it is achievable
In this video tutorial we accomplish the Cell Phone mission from the FIRST LEGO League robotics competition, season 2020-2021. The goal of the mission is to flip a phone. There were a couple of missions in the past with one important mission in 2017 that was very similar. It is a 10 out of 10 tutorial which means we accomplish the cell phone mission every time.
In this video tutorial we accomplish the Boccia mission from the FIRST LEGO League 2020 RePlay competition. We use LEGO Mindstorms Robot Inventor robot. In this mission we use an attachment that does three things in the same time - align, push one lever and drop a couple of boxes in a target. It is a complex attachment and it is worth the watch.
This video tutorial is about how to accomplish the Rowing Machine mission in the FIRST LEGO League 2021 RePlay robotics competition. The Rowing machine mission model consists of a wheel that should be pushed or pulled and will lift two other wheels, just like a real Rowing Machine. What you will get from this tutorial is an example of how to build a robot that is very precise. The attachment is simple, but the programming is more difficult. You must first align to a line, and then to a wall and then make a precise turn with the robot to accomplish the mission with our attachment.
The goal of the Innovation project mission is probably to give everybody an easy win on the competition. A mission that does not require an attachment or a complex program and it the same time is quite interesting. In this video tutorial you will see our robot and our innovation project construction, along with how we complete the mission. Hope you like them!
This is a 10 out of 10 video tutorial that is different from the rest. We demonstrate how difficult it is to accomplish a mission and we use an attachment that is working 5 out of 10 times. Our goal with the video is to give everybody the understanding that taking your time to accomplish a mission is the right thing. Most of the 10 out of 10 tutorials at FLLCasts contain solutions and approaches that are working in a repeatable fashion. Not this one. See how difficult it is to accomplish a mission and that we also make mistakes.
10 out of 10 tutorials for the Slide mission was a challenge. There were a lot of glitches with different attachments that we built. At the end we have an attachment that is able to reliably pull the mini figures up, then forward,then down which.
Similar to the tutorial for the LEGO Education SPIKE Prime this tutorial again accomplishes the cell phone mission. The mission is to flip the phone and is part of the FIRST LEGO League 2020 RePlay competition.
Step Counter mission model is one of the more interesting mission models at the FIRST LEGO League 2020 RePlay competition. There is a locking mechanism that does not allow us to just push on the mission model to accomplish it, you must push it really slow and to do this 10 out of 10 times it is challenging.
In this short animation we demonstrate how the LEGO Mindstorms Robot Inventor Distance sensors could be attached to the robot and then use to stop at distance from a wall. This wall could be the border of the field or another mission model. We need an attachment, we need a sensor and we need the robot. In the live video in the lesson we enter into more details and explanations of how the sensor is used. Programs for the distance sensor are provided in the lesson and in the LEGO Mindstorms Robot Inventor Programming course we enter into more details about how to program the distance sensor