This page shows all the robotics tutorials listed without specific grouping. Each tutorial is short, on specific topic, has a video. Tutorials are structured in sequence in Courses.
In this video tutorial, we demonstrate the accomplishment of three missions in a single run. The competition is FIRST LEGO League 2022/2023 SUPERPOWERED and the missions involve carrying and delivering a dinosaur toy, delivering energy units, and delivering the innovation project model.
This is the 10 out of 10 version of executing 3 missions in a single run. It worked like a charm! 10 times. We push and collect energy units for the FIRST LEGO League 2022-2023 SUPERPOWERED competition.
In this video tutorial, we accomplish three missions in a raw. It is a little longer and more detailed tutorial, but hey, 3 missions, one after the other. These are the Wind Turbine, where we have to push 3-4 times and collect the energy units, the Watch Television, where we reach the mission model and slightly push, and, of course, the Rechargeable battery - where we collect the energy units.
This is a 10 out of 10 video tutorial for the FIRST LEGO League 2020 RePLAY robotics competition and the Treadmill mission. We build a robot with consistent behavior that is able to achieve the mission every time
This is a 10 out of 10 tutorial where we deliver and drop precisely to complete a FIRST LEGO League 2021-2022 Cargo Connect mission. We reuse the same attachment as in other missions to demonstrate a reusable attachment.
The Load Cargo mission model could be accomplished by loading a cargo in a number of mission models on the FIRST LEGO League 2021-2022 Cargo Connect field. In this video tutorial, we load the cargo on the platooning trucks. In the previous one, we load it on the trains.
In this video tutorial, we demonstrate a reusable attachment. It is the same attachment we've previously used for two other missions. Sometimes we can build such attachments - one attachment that can complete several missions. Yes, the mission is similar - it is Load Cargo, but we are loading the cargo in different places on the field, and that's important.
Accuracy and consistency is the topic of this tutorial, as all 10 out of 10 tutorials are at FLLCasts. We use a robot build only from LEGO Mindstorms Robot Inventor parts and we accomplish the mission 10 out of 10 times. You will see how we use an active gear attachment to catch the wheel and pull it to the black circle, which accomplishes the mission
This is a 10 out of 10 tutorial for a complex robot attachment that does a precise drop and is auto-correcting at the same time. It has decent consistency and reliability. We drop cargo onto the train and use a LEGO Education SPIKE Prime robot for this FIRST LEGO League 2021-2022 competition.
This is a precise drop tutorial where we demonstrate how to accomplish the FIRST LEGO League 2021-2022 Load Cargo mission that requires us to precisely drop a cargo into the drain. It is not an easy task, but it has a trick. A trick that allows us to 'shake' the cargo a little bit. The attachment is also auto-correcting to improve consistency. Use this principle whenever you need to drop things.
As we are already off the season we decided to look back at the competition. First, we will take a look at the working solution for FIRST LEGO League 2017 Manhole Cover. This was generally accepted as one of the most difficult missions during the competition. We've built a single attachment to accomplish it.
(we are releasing the video without explanations and will add the explanations later)
The after season review continues. No. We are not publishing a single solution for the next season before it is over, but let's learn from the previous season. The current tutorial is about three missions at once on a single run with the robot. Most FIRST LEGO League teams try to accomplish one-two missions on a single run out of the base, and three is really what makes the difference
A clutch is a mechanical device that is used for engaging or disengaging power transmission. Now we will see how we can make such a device using LEGO.
This is a recording of a completely perfect, 10 out of 10 accomplishment of a two-part mission - Train tracks, from the FIRST LEGO League 2021-2022 Cargo Connect competition. Due to the proper use of motion and color/light sensors, the robot is 100% consistent and reliable for a non-trivial mission. Even when the robot makes a mistake, it auto-corrects and compensates for this mistake.
This tutorial explains the use of motion and light/color sensors to accomplish a complex mission split into three parts. It gets into detail about how we keep a straight line with the motion sensor, follow a line with the color sensors, and transition between different parts of the program by aligning and detecting lines with the sensor. The goal is to get to a reliable and consistent behavior of the robot. On top of that, it is configurable, as we've left a few parameters that could be set to configure the behavior for a specific robot, venue, lighting, battery level, and wheels friction.
This video tutorial is part of the series on how to make your robot 100% precise and accurate. We accomplish the Emergency Walk mission 10 out of 10 times. The attachment works. Every time the attachment is started in successfully accomplishes the mission and this is one of the most difficult missions on FIRST LEGO League competitions ever.
This is a 10 out of 10 tutorial, demonstrating the consistency and reliability of the active attachment for switching the engine in this mission. The power is transferred through a system of gear wheels to a lever at the end. We presume that the robot is already positioned.
This video tutorial demonstrates an attachment that flips a mission model. The mission model is attached to the field, but it contains a lever. This lever must be flipped from one side to the other. There is a switch. We use a pinless active attachment with gear wheels, and you can see how this works in the tutorial. There is no use of sensors as we don't need them. We will leave the alignment and positioning for some other tutorials.
In this video tutorial, we push two of the mission models with a pinless active attachment with gears. The goal is to push the mission models after the blue lines. This attachment is interesting as it demonstrates a non-straightforward idea of how we can push the mission models. We explain the Scratch program and how we use the motion sensors - you will learn how to turn to a specific angle by using the motion sensor.
This is a 10 out of 10 video tutorial that demonstrates the consistency and reliability of the robot that accomplishes the Unlock Cargo Plane mission. The attachment is an active attachment with gear wheels. It has a single lever constructed from 2 beans and we use this attachment to push on the mission model.
In this video tutorial, we demonstrate how to release the cargo of a mission model. This mission model is an Airplane. We have to push a lever down to release it. We use an active attachment with a gear wheel.
Gears could be a powerful tool for those who know how to use them appropriately. In this episode we introduce some of the basic terms and concepts behind using gears in your construction.
In this episode we build a reusable attachment for a LEGO Mindstorms EV3 robot that changes gears orientation and direction. It is one of the most useful attachments that you could use to move levers up/down and right/left. Adding the attachment on the robot takes 2-3 seconds and shows a very useful general principle of how to build reusable attachments.
In part 1 of How to on Gears tutorial I introduced you to the basics of the gear systems. Now we are going to examinate gear systems with more than two gears and take a look at cascade gear systems.
Based on feedback from many of you in this episode I would like to show you how to build an active attachment that changes the orientation of a gear wheel placed vertically to a gear wheel placed horizontally. This attachment could be used in competitions and shows a basic principle of changing the orientation. All attachments could follow the same principle.
In this video lesson I am building a LEGO Mindstorms EV3 active attachment powered by a small gear wheel. The attachment could move up and down, it is very useful for collecting objects. It could easily be adapted and used on other robots.
We are making a parallel with Video Lesson 56 from the series and we are also showing ways to improve the stability of an axle which is most of the time neglected, but could lead to great problems.
In this episode we continue from Episode 55 and we improve the durability and stability of the attachment for a LEGO Mindstorms EV3 robot. Many times attachments are not very stable which results in gaps between parts. The goal of the video is to give basic construction ideas.